SUMMER WAVES 100Fi, Инструкция по установке и эксплуатации

Страница: 15 / 24

12
FOR INSTALLERS AND PROFESSIONALS
※ Above data is subject to modification without notice.
2.2.2. Heat pump installation.

The frame must be fixed by bolts
(M10)
to concrete foundation or brackets. The concrete
foundation must be solid; the bracket must be strong enough and anti-rust treated;

The heat pump needs a water pump (Supplied by the user) . The recommended pump
specification-flux: refer to Technical Parameter, Max. lift ≥10m

When the heat pump is running, there will be condensation water discharged from the bottom,
please pay attention to it. Please insert the drainage tube(accessory) into the hole and clip it
well, then connect a pipe to drain off the condensation water.
2.2.3. Wiring & protecting devices and cable specification

Connect to appropriate power supply, the voltage should comply with the rated voltage of the
products.

Well earth the heat pump.

Wiring must be connected by a professional technician according to the circuit diagram.

Set breaker or fuse according to the local code (leakage operating current ≤ 30mA ).

The layout of power cable and signal cable should be orderly and not affecting each other.
UNIT=MM A B C D E F G H
MO
D
EL
Summerwave 80Fi 315 590 312 340 961 250 74 658
Summerwave 100Fi 315 590 312 340 961 290 74 658
Summerwave 135Fi 315 590 312 340 961 280 74 658
Summerwave 150Fi 315 590 312 340 961 340 74 658
Summerwave 175Fi 395 590 392 420 961 390 74 658
Summerwave 210Fi 395 590 392 420 961 460 74 758
Summerwave 270Fi 395 720 392 420 1092 620 74 958
Summerwave 270Fi 395 720 392 420 1092 620 74 958
Summerwave 350Fi 505 790 496 530 1161 650 74 958