Sumec POWERG N1F-GT-270/450-B, Оригинальное руководство пользователя

Страница: 7 / 20

Helpline: 0844 856 0793
Email: support@coreservice.co.uk
Website: www.coreservice.co.uk
11. The product should be supplied via a residual current device (RCD) with a tripping current of
not more than 30 mA.
12. Position the cord so that it will not be caught by the cutting attachment during operation.
Maintenance and storage
1. Disconnect the product from the power supply (i.e. remove the plug from the power supply or
the battery pack) and check for damage after use.
2. Disconnect the product from the power supply (i.e. remove the plug from the power supply or
the battery pack) before carrying out maintenance or cleaning work.
3. Use only the manufacturer’s recommended replacement parts and accessories.
4. Inspect and maintain the product regularly. Have the product repaired only by an authorised
service centre or similar qualified specialist.
5. When not in use, store the product out of the reach of children.
Vibration and noise reduction
To reduce the impact of noise and vibration emissions, limit the time of operation, use low-
vibration and low-noise operating modes as well as wearing appropriate personal protective
equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct cutting attachments for the product and ensure they in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions and keep it well lubricated (where
appropriate).
6. Plan your work schedule to spread any high vibration tool use across a longer period of time.
Emergency
Familiarize yourself with the use of this product by means of this instruction manual. Memorise the
safety directions and follow them to the letter. This will help to prevent risks and hazards.
1. Always be alert when using this product, so that you can recognize and handle risks early. Fast
intervention can prevent serious injury and damage to property.
2. Switch off and disconnect from the power supply if there are malfunctions. Have the garden
power tool checked by a qualified professional and repaired, if necessary, before you operate it
again.
Residual risks
Even if you are operating this product in accordance with all the safety requirements, potential
risks of injury and damage remain. The following dangers can arise in connection with the
structure and design of this product:
1. Health defects resulting from vibration emission if the product is being used over long periods of
time or not adequately managed and properly maintained.
2. Injuries and damage to property due to broken cutting attachments or the sudden impact of
4