![background image](http://html1.mh-extra.com/html/sumec/powerg-n1f-gt-270-450-b/powerg-n1f-gt-270-450-b_original-instruction-manual_1390554004.webp)
Helpline: 0844 856 0793
Email: [email protected]
Website: www.coreservice.co.uk
General Safety Instructions
1. This product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the product by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the product.
Power tool safety warnings
WARNING!
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury. Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool.
Distractions can cause you
to lose control.
Electrical safety
1. Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord.
Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
5. It is recommended for increased electrical safety that you use a Residual Current Device
(RCD) with a tripping current of not more than 30mA. Always check your RCD every time you
use it. This reduces the risk of an electric shock should the supply cable or plug become wet or
is damaged.
6. If an extension lead is used, ensure it is approved as suitable for outside use. Keep cables
visible so they do not become damaged by other machines and cutting tools or cause a trip
hazard.
1
Содержание POWERG N1F-GT-270/450-B
Страница 2: ...ELECTRIC GRASS Trimmer...
Страница 20: ......