9
3. Extend the pole to the desired length (Fig. 11).
NOTE:
Push poles toward each other to shorten the pole or pull them away
from each other to lengthen the pole. Only extend the pole to the minimum
length required to reach the limb to be cut.
4. Tighten the thread sleeve by hand in the direction indicated by the icon on
the part (Fig. 12), and ensure that the pole is secure.
ADJUSTING THE MULTI-ANGLE HEAD
The chainsaw head can be rotated for different cutting angles from 0° to 30°,
totaling three positions, 0°, 15° and 30°.
1. Disconnect the 10" pole saw from the power supply.
2. Push the angle adjustment button from both sides with your index finger and
thumb, then use the other hand to adjust the pole saw head to your desired
position (Fig. 13).