14
correct tension of a cold chain is when there is no slack on the underside of the
guide bar; the chain is snug, but you can rotate it by hand without binding.
During normal saw operation, the temperature of the chain will increase. The
drive links of a correctly tensioned warm chain will hang approximately
0.050 in. (1.25 mm) out of the bar groove (Fig. 16). Be aware that a chain
tensioned while warm, may be too tight upon cooling. Check the " cold tension"
before next use. The chain must be retensioned whenever the flats on the
drive links hang out of the bar groove (Fig. 16).
NUTS AND SCREWS
Periodically check that all the nuts and screws are tightened securely. Check
that the cam-lock that controls the telescoping pole is intact and in proper
working order.
CHAIN SHARPENING
Sharpening is necessary when:
•
The sawdust looks like dust
•
The cut is not straight
•
Cutting becomes more difficult
•
Vibrations increase
An authorized service center will sharpen the chain using the right tools to