16
GUIDE BAR MAINTENANCE
When the guide bar shows signs of wear, turn it over on the saw to distribute
the wear for maxim um bar life. Feathering or burring of the bar rails is a
normal process of bar wear. You should smooth such faults with a file as soon
as they occur.
Replace a bar with any of the following faults
•
Wear inside the bar rails permitting the chain to lay over sideways
•
Bent guide bar
•
Cracked or broken rails
•
Spread rails
Turn the saw over, check the underside of the guide bar, and make sure that
the lubrication holes and chain groove are free from impurities.
You can purchase replacement parts for your 10" pole saw by call at
1-833-818-4111.
CHAIN SPROCKET
Regularly check the condition of the sprocket
and replace it when wear exceeds 0.5 mm (Fig .18).
Do not mount a new chain with a worn sprocket or vice versa.
CLEANING
Use only mild soap and a damp cloth to clean the 10" pole saw. Never let any
liquid get inside the motor housing and NEVER immerse any part of the saw
housing in liquid.
