Suman eArche PV System, Руководство по установке

Страница: 7 / 20

© 2019 Sunman (Zhenjiang) Co., Ltd. All rights reserved. Specifications included in this manual are subject to change without notice.
www.sunman-energy.com
version 2019A page5 / 18
TM
•
Do not attempt to disassemble eArche, and do not remove any attached nameplates or components
from eArche.
•
Do not apply paint or adhesive to eArche’ top surface.
•
To avoid damage to the front cover and backsheet, do not scratch, “dent” or hit the front cover and
backsheet.
•
Do not drill holes in the ribs of SMA series. This may compromise the frame strength, cause corrosion
of the ribs and void the warranty.
•
Do not scratch the anodized coating of the ribs (except for grounding connection). It may cause
corrosion of the ribs or compromise the ribs strength.
•
A panel with broken front plate or torn back sheet cannot be repaired and must not be used since
contact with any panel surface or the ribs can cause an electric shock.
•
Work only under dry conditions, and use only dry tools. Do not handle panels under wet conditions
unless wearing appropriate protective equipment.
•
When storing uninstalled panels outdoors for any period of time, always cover the panels and ensure
that the front cover faces down “on a soft flat surface” to prevent water from collecting inside the
panel and causing damage to exposed connectors.
Installation safety
•
Never open electrical connections or unplug connectors while the circuit is under load.
•
Contact with electrically charged parts of the panels, such as terminals, can result in burns, sparks and
lethal shock whether or not the panel is connected.
•
Do not touch eArche unnecessarily during installation. The front surface and the ribs may be hot;
there is a risk of burns and electric shock.
•
Do not work in the rain, snow or in windy conditions.
•
Avoid exposing cables to direct sunlight in order to prevent insulation degradation.
•
Keep children well away from the system while transporting and installing mechanical and electrical
components.
•
Completely cover eArche with an opaque material during installation to prevent electricity from being
generated.
•
Do not wear metallic rings, watchbands, earrings, nose rings, lip rings or other metallic objects while
installing or troubleshooting photovoltaic systems.
•
Use only insulated tools that are approved for working on electrical installation.
•
Follow the safety regulations for all other system components, including wires and cables, connectors,
charging regulators, inverters, storage batteries, rechargeable batteries, etc.