Suman eArche PV System, Руководство по установке

Страница: 10 / 20

© 2019 Sunman (Zhenjiang) Co., Ltd. All rights reserved. Specifications included in this manual are subject to change without notice.
www.sunman-energy.com
version 2019A page8 / 18
TM
a. Confirmation of material of color steel
•
SMD Series to be bonded with PE((Use of the brand: BECKER, VALSPAR, NIPPON, AKZO NOBEL)
coating of zinc aluminum plate(Galvalume. AZ50, AZ55, AZ60 or Zincalume. AZ150). Substrate
materials not listed in the table must be approved by the local distributors, otherwise the warranty
will be invalid.
b. Size of color steel roofing:
c. Preparation of bonding material
•
Please contact the local distributors for the detail information.
d. Clean the color steel roofing
•
Always keep the backsheet of SMD Series and rooftop clean before install.
e. Install chemical bonding material
•
The thickness of
chemical bonding material should
not less than 4 mm, width is not less than 10 mm. The
length of the
chemical bonding material
shall not be less than the number corresponding to L in the
Confirmation of
material of color steel
Measure the size of
color steel roofing
Preparation of
bonding material
Clean the color steel
roofing
Installation
Install chemical
bonding material
Max Span=380mm
Max Span=380mm
Min Span=15mm Min Span=15mm Min Span=20mm