29
INSTAllATIoN AND oPERATIoN
WARNING!
Always take precautions while performing either type of Regeneration, as hotter exhaust temperatures
may cause a fire or similarly dangerous situation. Refer to the engine manual for proper safety procedures.
When an automatic or manual Regeneration is in process, Regeneration icons are shown on the digital
display. The table below shows each Regeneration symbol, active Regeneration process, and required
operator action:
4.8.1 REGENERATION SYMBOLS SHOWN ON DISPLAY
INDICATOR
SYMbOL
ACTIVE WHEN
OPERATOR ACTION
Engine Emissions
System Malfunction
Indicator
1. Engine emissions outside of
normal operating range.
2. Engine emissions system fault.
Contact your servicing dealer.
Engine Emissions
System Malfunction
and Warning Indicator
1. Engine emissions outside of
normal operating range. Machine
performance will be reduced.
2. Engine emissions system fault.
Machine performance will be
reduced.
Contact your servicing dealer.
Engine Emissions
Temperature Indicator
1. Exhaust gas temperature is high.
2. Exhaust filter cleaning is in
process.
Machine can be operated as
normal. If operating in an area
where high exhaust temperatures
may be an issue, abort exhaust
filter cleaning by using the
disable feature.
Engine Emissions
Temperature Indicator
and Warning Indicator
Exhaust gas temperature is higher
than expected. Machine performance
is reduced.
Contact your servicing dealer.
Engine Emissions
Temperature Indicator
and Stop Indicator
Exhaust gas temperature is higher
than expected. Machine performance
is reduced.
Contact your servicing dealer.
Exhaust Filter
Indicator
1. Soot level in the exhaust filter
indicates need for an exhaust filter
cleaning.
*DTC: 003719.15 will be
present.
2. Aftertreatment System Fault.
Enable auto filter cleaning to
allow a cleaning cycle or begin
a manual/parked cleaning. If
filter cleaning is performed and
indicator is still active, contact
your servicing dealer.
Exhaust Filter and
Warning Indicator
1. Machine performance is reduced
due to moderately high soot level.
*DTC: 003719.16 will be present.
2. Aftertreatment System Fault.
Machine performance will be
reduced.
Begin a manual/parked cleaning.
If filter cleaning is performed and
indicator still active, contact your
servicing dealer.
Exhaust Filter and
Stop Indicator
1. Exhaust filter requires a service.
Machine performance is reduced due
to extremely high soot level and a
stop engine request is made.
*DTC: 003719.00 will be present.
2. Aftertreatment System Fault.
Machine performance is reduced.
Service the exhaust filter.
Contact your servicing dealer.
Auto Cleaning
Disabled Indicator
Auto exhaust filter cleaning is
disabled.
If possible, enable auto cleaning.
*Diagnostic Trouble Codes (DTC)
Содержание D260UJD4PTOW
