SUHNER ABRASIVE ROTOfera, Техническая документация

Страница: 25 / 64

2.2.4 s
Afety guArd
If a safety guard is supplied with the hand tool, it is
imperative that the safety guard be used.
2.3 s
pecificAtions
3-phase AC motor
Voltage
42/400/415V: 50Hz / 230/460V: 60Hz
Power Input 1000W (1200W - 60Hz)
Power Output 800W (906W - 60Hz)
Protection class 1
Type of protection IP44
No-load speed 50Hz 850-12‘000min
-1
No-load speed 60Hz 1‘100-14‘600min
-1
Sound pressure level 50Hz 79dB(A), K=3dB(A)
Sound pressure level 60Hz 81dB(A), K=3dB(A)
Sound power level 60Hz 92dB(A), K=3dB(A)
Threaded connection for flexible shafts of type:
DIN 10 M10
NA 4, NA 7, NA 10
see catalog
G28 G28
NA 4, NA 7, NA 10
see catalog
2.3.2 v
ibrAtion mesurement vAlues of hAnd tools
BSG 10 Test grinding wheel ø 100x25
Measurement value <2.5m/s
2
/K=1.5m/s
2
Drive 7‘000min
-1
FSM 1:1 Test grinding wheel ø 180x6
Measurement value 4.7m/s
2
/K=1.5m/s
2
Drive 8‘000min
-1
WI 7, WI 10 Test grinding wheel ø 50x6
Measurement value <2.5m/s
2
/K=1.5m/s
2
Drive 15‘000min
-1
FH 12 Test grinding wheel ø 80x10
Measurement value <2.5m/s
2
/K=1.5m/s
2
Drive 12‘000min
-1
FH 10 Test grinding wheel ø 80x10
Measurement value <2.5m/s
2
/K=1.5m/s
2
Drive 15‘000min
-1
According to EN 60745.
The specified vibration value was measured with a
standardised test method and may differ from the
actual operating value. The specified value can be
used for product comparisons or for an introductory as-
sessment of work breaks.
2.4 o
perAting conditions
Temperature range during operation: 0 to +50°C
Relative air humidity: 90% at +30°C, 65% at +50°C
To avoid strong looping movements and beaming
of the flexible shafts, the working pressure must
be reduced.
3.1 m
Achine
3.1.1 s
elect the speed
Pull the locking pin to disengage it (1). Set the speed you
want by pulling or twisting the eccentric (2).
You may set the speed only when the tool is
switched off.
3.1.2 s
tArting the mAchine
Before turning on the machine, make sure to re-
move wrenches and adjusting tools.
When turning on, hold the flexible shaft extended.
During operation make sure that the flexible shafts have
large bend radius.
Before starting the machine, hold the hand tool against
turning!
The machine has a high starting torque!
Operate power switch of the machine.
3.1.3 m
Achine stop
Power switch OFF.
Hold hand tool steady until the speed Zero is reached.
3.1.4 s
hAft receptAcle
On production stop place shaft in the appropriate shaft
receptacle (type F + STM).
On prolonged interruption of work detach shafts
and hand tools and store shaft straight.
3.
haNDLINg
/ o
PERaTIoN
25
PT
ES
IT
FR
DE
NL
PL
CZ
FI
SE
CN
EN