OPERATING MANUAL FOR SELECT EDI 60
L300180 Iss:A
9
The system must be shut down and be protected from further use until all
repair and maintenance tasks have been completed. It is essential to
observe the shutdown procedure as described in this Operating Manual.
Before beginning tasks relating to electrical equipment/components of this
system, a check must confirm that power has been disconnected from the
corresponding section of the system. In addition, the system must be
secured to prevent it from being turned on again unintentionally.
4.6
Disposing of system parts and operating materials
When they need to be discarded, consumables and spares must be
disposed of according to local and National requirements. Refer to
Section 13.5 regarding disposal.
4.7
Unauthorised conversion and manufacturing
replacement parts
Modification of the unit is only permitted with the approval of the
manufacturer. The same applies to the uploading of new software for the
control system. Original replacement parts and accessories authorised by
the manufacturer enhance safety, the use of other non-approved parts will
void the warranty and could affect the safety and or performance of the
unit.
4.8
Warranty claims and liability
This product has been manufactured in accordance with our ISO
9001:2008 quality control process. If, however, you are unsatisfied with
the unit, please contact SUEZ Ltd. Any warranties guaranteed by SUEZ
with respect to the Select edi 60 will be void if the equipment is not used
in accordance with the written instructions provided within this Operating
Manual.
Please visit our website (
www.suezwater.co.uk
) for a copy of our terms
and conditions which contains further details on warranties.
