Rev. 05
– 03/02/2021
Pag. 18/37
Code: 71419 - 71420
Entering the water is one of the most delicate moments in the dive. Various factors like the change in temperature,
use of scuba equipment, the weight of the equipment and other difficulties make the addition of the SCOOTER an
inevitable added task loading.
14.
ENTERING THE WATER WITH THE SCOOTER
Before turning on or using the SCOOTER, make sure that all the equipment in use
for the dive is correctly positioned and in good working order. Only use the
SCOOTER after completing these checks. Incorrect dive preparation is highly
dangerous and, in some situations, the SCOOTER may represent an additional
hazard.
Pay particular attention when entering rough sea since waves could lift and launch
the SCOOTER against the diver with even fatal consequences. Never activate the
SCOOTER until the diver is in the water and prepared to begin the dive.
AFTER entering the water and have submersed the SCOOTER, the main switch can be switched ON.
The SCOOTER must only be switched on when it is in the water: spinning the
propeller in the air can be dangerous and damage the hydraulic seal of the motor
shaft.
Once into the water, pull the trigger (toward the diver) to activate the propeller.
Releasing the trigger stops the propeller.
Содержание VRt
Страница 25: ...Rev 05 03 02 2021 Pag 25 37 Code 71419 71420...