SUEX 71393, Руководство пользователя и предупреждения

Страница: 9 / 40

Rev.01
– 11/01/2021
Pag. 9/20 Code: 71380
DO NOT attempt to CHARGE the BATTERY USING THE RED CONNECTOR
located on the bottom of the battery.
DO NOT attempt to CHARGE batteries that are DAMAGED or leaking, or that are
RUSTY.
ENVIRONMENTAL CONDITIONS IDEAL FOR CHARGING
The charging temperature range is 0 ° C + 36 ° C. The ideal battery temperature at the start of the charging phase
is 20 ° C.
9.2. WHEN CHARGE THE BATTERY
Fully recharge the BATTERY:
•
BEFORE EACH USE taking care to let the BATTERY cool before inserting it into the Scooter;
•
At least once every 2 months;
•
When the charge level is less than 20%.
9.3. NEW BATTERY, FIRST USE
A new battery operates at full capacity only after a few complete charging cycles (4-5): this for reasons related to
the activation of internal chemistry.
10. IMPORTANT WARNINGS ON THE BATTERY LIFE
BATTERY life (i.e. the total amount of energy that it can supply to the user device after a full charge) is a feature
that depends on numerous factors including environmental conditions, how it is used, how to charge and
discharge.
To counteract the natural progressive - normally very slow - decay over time of the battery life, the user must keep
in mind that:
•
Extreme temperatures can affect battery capacity and charging efficiency.
•
Batteries must be stored at a temperature between 15 ° C and 36 ° C (the ideal temperature is around 20 ° C):
conditions other than those described above can affect the effectiveness of the recharge as well as the number
of possible recharges.
•
Leaving (and storing) the BATTERY in a hot (> 36 ° C) or cold (<15 ° C) environment reduces the battery
capacity and its life span.
•
If during the use of the Scooter you notice a significant drop in distributed power, immediately stop use and turn
it off using the switch.
The state of efficiency of the BATTERY, as regards the duration of delivery, must be periodically checked: batteries
that show a 20% reduction compared to the condition at the beginning of their life must be replaced and disposed
of in the manner provided (see Cap. "Disposal").
An indication of the current state of efficiency of the battery is the "burn-test" test (see User manual Burn - test).
11. CONVERSION KIT INSTALLATION
12. IDEAL CONDITIONS FOR BATTERY OPERATION AND DISCHARGE
It is recommended to use the BATTERY at a temperature between 15 ° C and 36 ° C.
To avoid rapid deterioration, the BATTERY must NEVER be completely discharged under any circumstances: the
cut-off device is present in to the BATTERY (see chapter "In the event of cut-off intervention").
IMPORTANT NOTE!
Excessive discharge can irreparably damage the battery