SUEX 71393, Руководство пользователя и предупреждения

Страница: 6 / 40

Rev.01
– 11/01/2021
Pag. 6/20 Code: 71380
To view the state of charge of the battery, operate the scooter's trigger, after a few seconds of starting the engine,
the reading of the residual battery capacity will be displayed on the charge indicator in relation to the number of lit
LEDs.
For example with Li ION Battery:
9 LEDs on: battery charge from 90% to 100%
8 LEDs on: battery charge from 80% to 90%
7 LEDs on: battery charge between 70% and 80% and so on ...
Note the following:
•
The charge indicator on the Scooter (or its display on an external device) provides an approximate indication of
the BATTERY charge status. Depending on the general condition of the BATTERY and its use, the various
elements that indicate the state of charge during use may not accurately reflect the residual state of charge of
the BATTERY.
•
The indication of the state of charge is a relative indication, that is referring to the actual condition of the
BATTERY and not to that of a new battery (at maximum efficiency).
•
The BATTERY is subject to a natural decrease in its capacity over time due to various factors including the
main ones being age, how to use it and environmental conditions.
•
Particularly heavy use or, on the other hand, too mild (with a few complete charge / discharge cycles),
particular environmental factors and battery damage can lead to:
•
- early decay of its effective capacity
•
- the reduction of its delivery duration for use
•
- falsified readings of the state of charge.
•
The same BATTERY in different environmental situations could therefore show different delivery durations.
•
It is therefore important to charge the BATTERY 100% before each dive, that is, charge it, until the charger
marks the end of the charge.
•
Do not use the charge indicator as a tool to program the dive or the duration of the dive during its course, but
program the dive with the usual safety parameters.
NOTE: SUEX s.r.l. declines any responsibility for the failure or incorrect evaluation of the residual battery
charge that has led to incorrect assessments regarding the autonomy of the Scooter.
8.2. BATTERY STATUS THROUGH BLUETOOTH CHANNEL
SUEX DPVs are equipped with bluetooth devices that allow to get motor and LI ION battery information.
These functions are available only out of water and require the Calypso App (available on Google Play & App
store).
In order to turn the Bluetooth system on, the battery has to be connected to the motor and the Scooter has to be
switched ON.
In order to read the battery data when the battery is off-board, connect the battery to the charger and plug the
charger to the main. Once the Bluetooth devices are ON, the application is ready and the data can be read.
First time connection will require Bluetooth pairing of devices and smartphone.
The battery equipped with a DRIVe system has a serial number such as SUEX_BATTxxxxxx_BT, while the motor
has a serial number such as AAxxxxxxxxxx
From here on, follow the App instructions.
DPV acceleration ramp can be adjusted by the same App.