Subaru Legacy 2021, Руководство пользователя

Страница: 177 / 592

(173,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
– On the floor
– Inside the glove box
– Inside the door trim pocket
– On the rear seat
– On the rear shelf (Legacy)
– Inside the trunk (Legacy)
– At the corner of the cargo area
(Outback)
. When operating the push-button
ignition switch or starting the engine,
if the access key fob battery is dis-
charged, perform the procedure de-
scribed in “Access Key Fob – If Access
Key Fob Does Not Operate Properly”
F
P465. In such a case, replace the
battery immediately. Refer to “Repla-
cing Battery of Access Key Fob”
F
P526.
& Switching Power Status
1) Operation indicator
2) Push-button ignition switch
The power status is switched every time
the push-button ignition switch is pressed.
1. Carry the access key fob, and sit in the
driver’s seat.
2. Make sure the select lever is in the “P”
position.
3. Press the push-button ignition switch
without depressing the brake pedal. Every
time the button is pressed, the power is
switched in the sequence of “OFF”, “ACC”,
“ON” and “OFF”. When the engine is
stopped and the push-button ignition
switch is in “ACC” or “ON”, the operation
indicator on the push-button ignition switch
illuminates in orange.
Power
status
Indicator color Operation
OFF Turned off
Power is turned
off.
ACC Orange
The following
systems can be
used:
audio and ac-
cessory power
outlet.
ON
Orange
(while engine is
stopped)
All electrical
systems can be
used.
Turned off
(while engine is
running)
CAUTION
. To prevent the vehicle battery
from discharging, do not leave
the push-button ignition switch
in the “ON” or “ACC” position for
a long time.
. To avoid a malfunction, observe
the following precautions.
– Do not spill drinks or other
liquids on the push-button
ignition switch.
– CONTINUED –
Push-Button Ignition Switch (Models with Push-Button Start System)
171
3
Instruments
and
Controls