Subaru Legacy 2021, Руководство пользователя

Страница: 159 / 592

(155,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
gate may not function properly or
may malfunction.
The power rear gate operates only when
all of the following conditions are satisfied.
. The vehicle is stopped completely.
. The outside temperature is within a
range from −22 8 F to 140 8 F (from −30 8 C to
60 8 C).
. The ignition switch is in the “OFF” or
“ACC” position. Or, the ignition switch is in
the “ON” position and the select lever is in
the “P” position.
We recommend using the power rear gate
function in most circumstances instead of
manual operation.
NOTE
. The rear gate may not move
smoothly when the battery power be-
comes low.
. Do not press the power rear gate
button repeatedly while the power rear
gate is operating. Otherwise, the sys-
tem may ignore the button operation in
order to avoid being damaged.
. If the vehicle starts to move while the
power rear gate is operating, the sys-
tem sounds a buzzer and closes the
rear gate automatically. At this time, if
the system detects jamming, it will
deactivate the power rear gate and the
rear gate will not be closed. If this
occurs, close the rear gate manually.
For details, refer to “Manual Rear Gate”
F P151.
. If you try to open the rear gate using
the power rear gate function immedi-
ately after closing the rear gate using
the power rear gate function, an elec-
tronic chirp will sound and the rear gate
will not open. Wait for a while before
trying to open the rear gate via the
power rear gate function.
. If either of the operating conditions
has not been satisfied while operating
the power rear gate, an electronic chirp
will sound and the power rear gate will
be deactivated. In this case, the rear
gate may stop opening or closing
suddenly.
!
Operation
NOTE
.
The rear gate will remain unlocked
even after closing it. Always lock the
rear gate when leaving the vehicle.
. If you cannot open/close the rear
gate by performing the operation de-
scribed here, a short electronic chirp
will sound three times (beep, beep,
beep). In this case, perform the initiali-
zation of the power rear gate. Refer to
“Initialization of power rear gate”
F
P158.
! By the power rear gate button
(other than the buttons on the
rear gate)
Power rear gate button on the instrument
panel
– CONTINUED –
Rear Gate (Outback)
153
2
Keys
and
Doors