SUBARU OF AMERICA
PAGE
2 OF 4
DATE
01/26/12
1
Loosen or remove battery
hold down bolts.
2
Remove negative battery
terminal first, then the
positive terminal. Remove
battery from the vehicle.
3
7
Route battery warmer harness
around the positive battery
cables toward the passenger
side shock tower.
C
703698 Rev A 01/26/12
4
Remove the plastic battery
cover (if equipped) prior to
installing the battery warmer.
Do not re-use the cover.
Remove dirt and debris from
the sides of the battery. Then
wipe clean and dry.
5
Wrap the warmer snugly around
the battery with the printed
side facing outwards. Use the
wire ties provided to secure the
warmer to the battery as shown.
Ensure that the harness exits
below the positive terminal as
shown.
6
Place the battery back in
the vehicle. Tighten battery
hold down bolts taking care
not to pinch the warmer
with the hold down clamps.
Reconnect the positive
terminal first followed by the
negative terminal.
INSTALLATION:
Wire
Ties
Harness
