Subaru Impreza 2003, Руководство по обслуживанию

Страница: 2210 / 3610

DI-30
DIFFERENTIALS
REAR DIFFERENTIAL FOR T-TYPE
4) Remove the bolts, and then remove the rear
cover.
NOTE:
Remove it by tapping with plastic hammer.
5) Make right and left side bearing retainers in or-
der to identify them at reassembly. Remove the
side bearing retainer attaching bolts, set the ST to
differential case, and extract right and left side
bearing retainers with a puller.
NOTE:
Each shim, which is installed to adjust the side
bearing preload, should be kept together with its
mating retainer.
ST
398457700 ATTACHMENT
6) Pull out the differential case assembly from dif-
ferential carrier.
NOTE:
Be careful not to hit the teeth against the case.
7) When replacing the side bearing, pull the bear-
ing cup from side bearing retainer using ST.
ST
398527700 PULLER ASSY
8) Extract the bearing cone with ST.
NOTE:
• Do not attempt to disassemble the parts unless
necessary.
• Set the puller so that its claws catch the edge of
bearing cone.
• Never mix up the right and left hand bearing rac-
es and cones.
ST
18759AA000 PULLER ASSY
9) Remove the crown gear by loosening the crown
gear bolts.
(A) Rear cover
(B) Differential carrier
(A)
(B)
DI-00063
ST
DI-00064
DI-00065
ST
DI-00066
DI-00316
ST
DI-00068