Subaru Impreza 2003, Руководство по обслуживанию

Страница: 85 / 3610

PM-9
PERIODIC MAINTENANCE SERVICES
ENGINE OIL
6) Fill engine oil through the filler pipe up to center
between upper level and lower level. Make sure
that the vehicle is placed level when checking oil
level. Use engine oil of proper quality and viscosity,
selected in accordance with the table in figure.
Recommended oil
API classification
SL or SJ with the words “Energy Conserv-
ing or Energy conserving II”, CCMC speci-
fication G4 or G5, ACEA specification A1,
A2 or A3, or New API mark displayed on
the container (If it is impossible to get SL
or SJ grade, you may use SG or SH grade.)
Engine oil capacity
SOHC model (Upper level):
Approx. 4.0
2
(4.2 US qt, 3.5 Imp qt)
SOHC model (Lower level):
Approx. 3.0
2
(3.2 US qt, 2.6 Imp qt)
DOHC Turbo model (Upper level):
Approx. 4.5
2
(4.8 US qt, 4.0 Imp qt)
DOHC Turbo model (Lower level):
Approx. 3.5
2
(3.7 US qt, 3.1 Imp qt)
• SOHC MODEL
• EXCEPT FOR SOHC MODEL
The proper viscosity helps vehicle get good cold
and hot starting by reducing viscous friction and
thus increasing cranking speed.
NOTE:
• When replenishing oil, it does not matter if the oil
to be added is a different brand from that in the en-
gine; however, use oil having the API classification
and SAE viscosity No. designated by SUBARU.
• If vehicle is used in desert areas with very high
temperatures or for other heavy duty applications,
the following viscosity oils may be used:
API classification: SL or SJ.
SAE Viscosity No.: 30, 40, 10W-50, 20W-40, 20W-
50
7) Close the engine oil filler cap.
8) Start the engine and warm it up for a time.
9) After the engine stops, recheck the oil level.
<Ref. to PM-10, INSPECTION, Engine Oil.>
(1) Viscosity No. and applicable temperature
(2) Preferred
(1) Viscosity No. and applicable temperature
(2) Preferred
LU-00071
40 30 15 0 -15 -20 -30 ( C)
104 86 59 32
10W-30,10W-40
5 -4 -22 ( F)
5W-30,0W-20 (2)
SAE (1)
LU-00076
40 30 15 0 -15 -20 -30 ( C)
104 86 59 32
10W-30,10W-40
5 -4 -22 ( F)
5W-30 (2)
SAE (1)