8 OF 12
PART NUMBER
H001SXC100
ISSUE
-
DATE
10 Jan 2018
SUBARU OF AMERICA
11. Using alcohol, clean the air duct surface to the right of
the center console, as shown. Remove the release liner
from one (1) of the supplied wire harness clips. Apply
to the air duct above the hose port and press fi rmly in
place for at least ten (10) seconds. Secure the remote
engine start harness to the wire harness clip at the white
tape ring. (FIGURE T)
NOTE: Ensure the opening of the wire harness clip
faces upward.
REMOTE ENGINE START WIRE HARNESS CONNECTIONS / ROUTING, continued
5
FIGURE T
FIGURE U
FIGURE V
S
U
BA
R
U
>PP-T
D20
C1601009
9
REMOTE ENGINE START ECU MOUNTING
6
1. Locate the glove box inner cover and carefully pull back
the insulation pad from the top and back areas, as shown.
Using alcohol, clean the top and back of the glove box
inner cover, as shown. (FIGURE U)
NOTE: Ensure the glove box inner cover is
completely dry.
2. Remove the release liners from two (2) of the supplied
wire harness clips. Apply to the back of the glove box
inner cover and press fi rmly in place for at least ten (10)
seconds. (FIGURE V)
NOTE: Ensure the opening of the left wire harness
clip faces upward and the opening of the right wire
harness clip faces the passenger door when the
glove box inner cover is reassembled.
Insulation
Clean with
Alcohol
Hose Port
Right Clip
Left Clip
