Subaru 2006 Impreza WRX, Руководство пользователя

Страница: 133 / 365

3-20
Instruments and controls
Selector lever position indi-
cator (AT vehicles)
This indicator shows the position of the
selector lever.
Turn signal indicator
lights
These lights show the operation of the
turn signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be
burned out. Replace the bulb as soon as
possible. Refer to the “ Replacing bulbs ”
section in chapter 11.
High beam indicator
light
This light shows that the headlights are in
the high beam mode.
This indicator light also comes on when
the headlight flasher is operated.
Cruise control indica-
tor light
The cruise control indicator light comes on
when the ignition switch is turned to the
“ ON ” position and goes out after approxi-
mately three seconds.
This light comes on when the “ CRUISE ”
main switch is pressed.
If you move the cruise control lever or
press the main switch button while turning
the ignition switch “ ON ” , the cruise control
function is deactivated and the “ CRUISE ”
indicator light flashes. To reactivate the
cruise control function, turn the ignition
switch back to the “ ACC ” or “ LOCK ” posi-
tion, and then turn it again to the “ ON ” po-
sition.
Cruise control set indi-
cator light
The cruise control set indicator light
comes on when the ignition switch is
turned to the “ ON ” position and goes out
after approximately three seconds.
This light comes on when vehicle speed
has been set.
Driver ’ s control center
differential auto indica-
tor light (WRX-STI)
This light functions while the ignition
switch is ON. When on, it indicates that
the driver ’ s control center differential is set
to AUTO mode. It goes off when the driv-
er ’ s control center differential ’ s manual
mode switch is pressed. For details, refer
to Chapter 7, “ Driver ’ s Control Center Dif-
ferential (DCCD) (WRX-STI) ” .
300622