Sub-Zero PRO 48, Руководство по установке

Страница: 2 / 32

2
|
English
Opening Dimensions
STANDARD | FLUSH BUILT-IN INSTALLATIONS
H
OPENING
HEIGHT
FRONT VIEW SIDE VIEW
W
OPENING WIDTH
D
OPENING
DEPTH
TOP VIEW
OPENING DIMENSIONS W H D
Standard 1206 mm 2127 mm 610 mm
Flush 1219 mm 2137 mm 660 mm
For standard built-in installations, the face frame will extend
51 mm beyond cabinetry. In flush installations, the face
frame will be flush with surrounding cabinetry.
PRO 48 REFRIGERATION
Contents
2
PRO 48 Refrigeration
2
Opening Dimensions
3
Electrical
3
Plumbing
3
Preparation
4
Anti-Tip Bracket
4
Placement
4
Water Line
5
Alignment
5
Completion
Tools | Materials
• Screwdrivers—standard, Phillips and Torx.
• Power drill.
• Drill bits (masonry bits required for concrete installation).
• Standard Allen wrench set.
• Standard socket and wrench set.
• .6 m and 1.2 m levels.
• Tubing cutter.
• .9 m of
1
/
4
" OD copper, braided stainless steel or PEX
tubing.
• Saddle valve.
• Material to protect home, flooring and cabinetry during
installation.
Important Note
To ensure this product is installed and operated as safely
and efficiently as possible, take note of the following types
of highlighted information throughout this guide:
IMPORTANT NOTE highlights information that is especially
important.
CAUTION
indicates a situation where minor injury or product
damage may occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or
death if precautions are not followed.
Product Information
Important product information including the model and
serial number are listed on the product rating plate. The
rating plate is located inside the cabinet, to the left of the
upper freezer drawer. Refer to the illustration below.
If service is necessary, contact your authorized Sub-Zero
dealer.
Rating plate location (inside
drawer).
RATING
PLATE
SITE PREPARATION