16
W O L F
S T E A M E R M O D U L E
U S E & C A R E
S I G N A T U R E
P O L I S H
Signature Polish
is available from
Signature Limited
Laboratory,
P. O. Box 13436,
Dayton, Ohio
45413-0436, or
call 877-376-5474
(toll free).
C A R E
R E C O M M E N D A T I O N S
C O M P O N E N T
C A R E R E C O M M E N D A T I O N
Domed Glass Lid
Glass
CAUTION: Make sure the steamer module is off and all surfaces are cool
before cleaning any part of the unit.
The reversible domed glass lid can be placed in the dishwasher or cleaned
with warm soapy water, then rinsed and thoroughly dried.
Exterior Cleaning: Use a soft, nonabrasive stainless steel cleaner like Signa-
ture Polish (see side note) and apply with a soft lint-free cloth. To bring out
the natural luster, lightly wipe the surface with a water-dampened microfiber
cloth, followed with a dry microfiber cloth. All work should follow the same
grain direction as the finish. Best results are obtained by keeping the cloth in
continuous contact with the metal.
For best results, wipe up spills and spatters as they occur and immediately
after the module has cooled. If splatters are allowed to dry, they may perma-
nently damage or stain the finish.
CAUTION: Do not use abrasive cleaners (e.g., Scotch-Brite or Soft Scrub);
they will permanently scratch the surface.
After emptying the water from the steamer basin, pour 4 quarts (3.8 L) water
with dish soap into the empty basin. Scrub with a nylon brush. Rinse well
and drain. Dry thoroughly.
Hard water calcium deposits: Clean with white vinegar and water or a
cleaner designed to remove minerals. Let mixture stand in the steamer basin,
then scrub with a nylon brush or dishcloth. Rinse well.
Soft water salt deposits: Wipe out with a wet cloth. Rinse well.
WARNING: Pay particular attention to the drain outlet and manual valve
when emptying, as water may be hot. Allow unit to cool.
Both the solid and perforated insert pans can be cleaned by hand with warm
soapy water or placed in the dishwasher.
Use warm soapy water with a soft cloth to remove fingerprints and residual
food and water stains from the control panel. Apply cleaner to the cloth
before wiping panel. Do not use aggressive commercial cleaners, as they
may damage the assembly.
Steamer Module
Frame
Stainless steel
Steamer Basin
Stainless steel
Insert Pans
Stainless steel
Control Panel
Ceran glass
