Stylies ATLAS, Инструкция по эксплуатации

Страница: 15 / 62

15
• Do not switch on the device when there is no water in the Reservoir.
• Do not use metal or hard object to clean the Oscillator.
• Do not use any harsh chemicals in the water Reservoir.
• Do not put the device into water, or let water get into the Main Base.
• To avoid damages due to escaping water, the unit may not be placed on
the floor.
• Do not touch the Oscillator during operation.
• Never submerge the unit with electrical system and air vent in water or
other liquids or rinse it off with water or other liquids.
• Do not use the device in an area where the humidity level exceeds 60
percent.
Never tilt, move, or attempt to empty the device while it is operating.
FIRST USE / OPERATION
Preparation:
When using your Atlas for the first time, place it on a smooth, flat and stable surface. To stabilize it,
you can fold out the 2 Feet (4) stalled under the Main Base (3).
Pull out the fixation on the Adapter (8) by pressing the button on the Adapter. Select the suitable Plug
(9) and (10), and install it by pushing back into the slot with a “click” sound.
Fill a bottle with max 0.5 liter (22 oz) clean, fresh and cold water and fix the Bottle Adapter (5) onto
the bottle completely till it stops. Do not use carbonated water. To avoid scales, distilled water is
recommended.
Operation:
1. Open the Mist Outlet (1), and make sure it is not facing directly or too close to electrical sockets,
walls and other objects.
2. Push the bottle, together with the Bottle Adapter (5) back onto the Main base (3). Do not press
the plastic bottle.
3. Plug in the Adapter into the Socket (7) and with the Plug (9) or (10) into the main power supply.
4. Switch on the unit by turning the Main Switch (6) clockwise.
5. Mist output can be adjusted by turning the Main Switch (MAX is on the very right end of the dial)
6. When there is not enough water in the unit, the unit will be switched off, and bottle must be
refilled with fresh clear water.