13
Lowes.com
Note:
When a function is changed from the control
panel or remote control there will be a corresponding
indicator (see Figure 1) on the upper-right of the
projection screen. The indicator shows the function
changed and the level selected by the control panel or
remote control. When the function is turned off, the
corresponding indicator will flash several times and then
fade off.
°
°
C
F
Fig . 1
OPERATING INSTRUCTIONS
Control panel can be accessed at upper-right corner of insert (O).
- POWER
The power button supplies power to all the functions of the fireplace. The power button will put the
fireplace in a standby mode. This will turn off all functions at once but will hold the settings in the memory.
By pressing the power button again the unit will turn on at the same settings.
NOTE: Holding the power button on the control panel for 10 seconds will disable the heater function.
- FLAME
Each time the flame button is pressed, the intensity of the flame decreases. There are 6 brightness levels
to cycle through, including the OFF setting.
- HEATER
The fireplace consists of a fan-forced wire element-type heater. The thermostat setting range is
62-82°F or always ON.
This button on the remote control only turns heater function ON and OFF.
NOTE: To change between °F and °C, press and hold the heater button on the control panel for
10 seconds.
- TIMER
Press the timer button to cycle through 10 timer settings (30 minutes, 1 hour, 2h, 3h, 4h, 5h, 6h,
7h, 8h and 9h and the OFF setting).
