11
Lowes.com
9. Stretch pre-attached piston hinge from left support
panel (L) and right support panel (M) to meet front
flip down door (J), then tighten small screws (GG)
in the pre-drilled holes. To install door pull (HH),
remove preassembled screws and then insert them
into the pre-drilled holes on the front hutch (J) and
back into door pull (HH) securely.
GG
AA
J
O
O
Hardware Used
GG
HH
Small Screw
Door Pull
x 4
x 1
9
Completed
Unit
Electric
Fireplace Insert
Install
Insert
From
Back
10. Remove the two mounting brackets attached to the
back of the front panels by removing the two screws
on each mounting bracket. Set aside. Do not install
the insert (O) until the fireplace mantel has been
placed close to its final resting position. Lift insert (O)
carefully into the back of the unit and center in the
opening. Do not drag insert (O) across hearth/base
(A) as it may scratch the unit. Reinstall the mounting
brackets to hold insert (O) flush against the inside of
the mantel front panel.
NOTE: Move the completed unit only short distances.
NOTE: Move completed unit with great care.
It takes two people to move completed unit
into final position.
10
