STX Mega-Steam 4000 SX2, Инструкция по эксплуатации

Страница: 11 / 20

- 9 -
The bent nozzle, small nylon brush, and small metal brush can be
attached to the complete accessory adapter for maximum steam
cleaning, sanitizing, and deodorizing.
PLEASE NOTE: PRIOR TO EACH USE , ENSURE THAT THE O-RINGS
ARE PRESENT TO ENSURE PROPER SEALING. Replacement O-rings
have been provided in case of loss or damage occurs. Damaged or
missing O-rings will cause water blow by and steam loss.
3. Two extension tubes have been provided with the STX Mega-Steam
unit. To attach the first extension tube to the steam gun, line up the
hole in the extension tube with the push bottom locking mechanism
on the steam gun - firmly and carefully push the two components
together until they click into place. An additional extension tube can
be attached to the initial extension tube the same way as the first tube
was attached to the steam gun.
NOTE:
• To remove the extension tubes, just press the button on the
extension tube or steam gun and carefully pull the two units
apart.
• The further steam travels through components, the more it
cools. For maximum temperature effect, use the least amount
of extension tubes as possible.
Then the Complete Assembled Accessory Adapter can be attached to
the Steam Gun or to one of the Extension Tubes. Always ensure that the
Accessory Adapters click into place so that they are firmly connected.
Complete Accessory Adapter Attached to Steam Gun