- 6 -
ASSEMBLY
1. Insert the plastic mixing bowl into the groove of the base with the
large round opening facing out and the square opening on the
top.
2. Insert the auger through the front opening of the mixing bowl into
the opening in the back of the base. The auger should securely
attach to the small hole on the interior of the base.
3. Secure the white plastic panel to the front of the base by lining the
appropriate holes up with the screws that are attached to the base
and pushing it back on the base over the screws until it is against
the mixing bowl.
4. Choose the white pasta disc you want to use and insert it into the
back of the metallic front panel. Make sure the tab on the white
pasta disc is inserted into the groove on the front panel.
5. Attach the metallic panel to the screws on the front of the machine
and push the panel in so it is flush against the machine. Secure
the panel by fastening the locking nuts tightly. Leave the locking
nuts in a vertical postion when tightened, this will allow room for
the pasta cutter to easily be used during operation.
6. Place the square plastic cover on top of the machine and push
down to lock it in place.
