DCX.Server/DCX.Client/DCX.NC
www.stute-engineering.de
C
h
a
p
ter
:
Q
ui
c
k S
tar
t
9
2.7
PROFESSIONAL
configuration (DCX.NC
& DCX.Client)
2.7.1
First steps
DCX.NC controller
Connect the delivered power adapter with the
DCX.NC unit
Connect the DCX.NC controller with a LAN
cable to your local network (e.g. with your AVM
Fritzbox)
Connect the delivered USB-RS232 interface to a
USB port of the DCX.NC unit
o
Connect the USB-RS232 interface with your DCX2496 unit
Switch on the DCX.NC controller. Wait approx. 50 seconds.
DCX.Client software
Note: First enable the Wi-Fi or cable network connection at your device!
Install the DCX.Client software at your computer or tablet/mobile phone (see chapter
2.2)
Open the program DCX.Client
o
For the first start wait 20-30 seconds. The client searches for the DCX.NC
Note: Test the network connection to the DCX.NC server via the button “Check DCX.Server”
from the tab “Settings”.
2.7.2
Control your DCX2496 device
Pre-condition: DCX2496 device and DCX.NC controller
are switched on.
Open the DCX.Client (e.g. from your mobile
phone)
o
Select the device ID of your DCX2496
(default= 1) from the “Home” tab
Alternative press the button “Find DCX devices…” to scan for devices.
Select afterwards a ID from the list
o
Press the button “Connect/Read DCX…” to connect the client with the
DCX2496 device
The progress bar in footer displays the status of the DCX data import
o
The software is ready to control the DCX2496
E.g., select the tab “A B C Sum”
Change the dB gain of “In A”
Check the level at the Behringer DCX2496
