DCX.Server/DCX.Client/DCX.NC
www.stute-engineering.de
C
h
a
p
ter
:
In
tro
du
c
tio
n
5
1.5
Is it possible to copy the DCX2496 settings for X-Over, EQ, Dyn EQ…
to another DCX2496 device?
Yes. Read the settings from the source device and store the settings in a preset. Connect the
target DCX2496 and copy the preset data to the 2
nd
device.
1.6
What do I need?
The DCX.Client software can be installed on your Desktop PC, Laptop, Tablet or Mobile Phone.
For the DCX.Server software you need a MS-Windows PC (Desktop, Tablet, Mini PC…) and a
USB-RS232 interface to control DCX2496 device(s).
1.7
Is it possible to control the DCX2496 without a separate computer?
Yes, with the DCX.NC controller. You need only a device like a Tablet or Mobile Phone for the
DCX.Client software.
1.8
Which DCX2496 functionalities are supported?
Input A/B/C/Sum:
o
Level, Mute, Delay,
o
EQ 1..9, Dynamic EQ,
o
Sum Level from In A/B/C
Output 1..6:
o
Level, Mute, Delay (long & short),
o
EQ 1..9, Dynamic EQ,
o
X-Over incl. X-Over link, Phase, Polarity, Limiter
DCX2496 Setup
o
Adjustment “Out configuration” (MONO, LMH LMH,..)
o
Adjustment “In Stereo Link” (A+B…)
o
Adjustment Sum signal setup (A+B, A, B, C, …)
o
Adjustment Output source for Out 1..6 (A,B,C, Sum)
Note: “Delay Link” is not supported and should be switched off.
1.9
Is it possible to store/re-store the DCX2496 settings?
Yes, the DCX.Client provides 2 preset memories. You can switch between the settings for a
DCX2496 unit or transfer the settings to another DCX2496 unit.
1.10
Can I use the DCX.Client on multiple devices (e.g. computer and
tablet)?
Yes. But you should avoid parallel controlling from two or more clients to the same
DCX.Server.
1.11
Is it possible to execute the DCX.Server on a
Wi-Fi connected computer?
No, the DCX.Server software has to be executed on a computer
with a wired LAN connection. But a connection via powerline
network adapter or network switch is sufficient. The DCX.Client can
be executed on a Wi-FI or LAN wired computer.
