8
3.Installation
Marking pen
Adjustable wrench
Silicone
Glass
Philips screwdriver
＋
Electric drill (including
4.5mm bit & 10mm bit)
Tape
1. After external thread of water outlet
hose
is wrapped with Teflon
tape, adapter nut need install sealing gasket ,tighten the adapter nut
to direction N, then after external thread of
angle stop
is wrapped with
Teflon tape, and tighten the connecting nut to direction G. If the angle
valve has been installed on the wall, to ensure proper installation of
new
angle stop
, the angle valve shall be replaced with the
angle stop
by professional personnel.
3.1 Install the Adapter Nut, Angle Stop
1/2”NPT Male
1/2”NPT Female
1/2”G Female
Adapter nut
Teflon tape
(Not included)
sealing gasket
A
G
N
Angle Stop
Installed adapter nut and angle stop
A
3.2 Install Toilet and Toilet Wax Ring( For Option B installation, please see template.)
Install the floor drain cover connector(not included) .
Insert the wax ring(not included)
under the toilet.
Position the toilet on the floor
drain,making sure the fixing bolts
are aligned with the toilet's holes.
Position correctly the two fixing bolts of the floor drain.
Firstly, open the cover and
seat; as the toilet is heavy,
lifting the product by two
persons at the same time is
needed.
Handing manner：
