Studio Logic Numa nano, Инструкция по эксплуатации

Страница: 10 / 16

i n s t r u c t i o n m a n u a l
10
i n s t r u c t i o n m a n u a l
English
NUMA
by Studiologic®
11
Edit Mode Part 3
Wheel Control/Polarity
This page for the Modulation-Wheel is divided in two
sections:
Wheel Control and Polarity (Image 18-19). The
selection is handled via the two pads
5 6
, and - as always -
via the Virtual Dial ¢ .
Wheel Control enables the following parameters:
Off
Modulation wheel is out of operation
Pitch
Make pitch changes with the modulation wheel
C#0-C#127
Moving the wheel generates a control change command
from 0 up to 127
The Polarity parameter defines the direction of the changes.
Pol.+ for an upward change, or Pol.- for a downward change.
Note : Any changes will take place only after a full movement
of the Modulation-Wheel.
Aftertouch Control / Polarity
Again you can find two settings here for Aftertouch control
(Image 20) :
Off
No Aftertouch at all
AFT
This activates the standard aftertoch of the external
sound module.
C#0-C#127
The changing parameter can be assigned to a control
change command.
The direction of the change is controlled with Aftertouch
Polarity (Image 21).
Note : The Aftertouch function is monophon.
•
•
•
•
•
•
Image 21
Image 20
Image 19
Image 18