STUDIO DUE Control Five, Руководство пользователя и оператора

Страница: 11 / 27

4 - MAKING THE SCENES
When a program is empty, the display will show:
To make a new scene, press INS STEP. Being the program empty the follow menu will be visualized:
You can set up the new program on Global Time or Step Time. Press EXIT (F3) or ESC to back without any
change.
In Global Time all scenes have same life-time but a different time of fading can be assigned to the scene, in
this time the parameters change up to the needed value.
The fading time can be lower or equal than the global time of the scenes. In case it is lower, at the end the
scene remains in stand-by until the end of the global time up to the change of the scene..
In Step Time , every scene has its own fading time and its own stand-by time, freely arranged.
At the end of fading (after the evolution of the parameters), the scene remain in stand-by for all the wait time
up to the change of the scene.
a) Pressing GLTM (F1) the menu will show:
The program is setted in Global Time, default time is 1.0 sec for global time and fading time.
Global time can be settled from 0.1 to 120.0 sec through the slider WAIT TIME, meanwhile the fading can be
settled from CUT (0), up to the same value of the Global time using the slider FADE TIME.
(Once moved one of the two slider you can enter the right time using the 0-9 buttons).
- Press SAVE (F1) to save the new scene, press EXIT (F3) or ESC to leave the function.
b) Pressing STTM (F2) the controller will show:
The program is setted in STEP TIME with time default of 1.0 sec for both waiting and fading time
Both times can be settled from CUT (0) up to 120.0 sec. Waiting time can be settled through the slider WAIT
TIME meanwhile fading through the slider FADE TIME.
Setting CUT both for waiting and fading time, the controller takes a minimum time of 0.1 sec
(Once moved one of the two slider you can enter the right time using the 0-9 buttons).
- Press SAVE (F1) to save the scene, press EXIT (F3) or ESC to leave the function.
After the first scene, the controller will show:
If you desire to program the spots in the first step, please read carefully the paragraph n. 4.
If on ather hand you prefer to add more steps in the program number 1, repeat the same operations reported
in the current page.
9