Studer Xcom-GSM, Руководство пользователя

Страница: 28 / 36

Studer Innotec SA
Xcom-GSM/-LAN
28 V2.0 User manual
8 FREQUENTLY ASKED QUESTIONS (FAQ)
8.1 LED
STATES
8.1.1 3G modem LED
State Indication
Off Power OFF
Always on Searching network
Slow blinking (800ms ON, 800ms OFF) Registered to the operator network
Fast blinking (200ms ON, 200ms OFF) Server connected and transmitting data
8.1.2 LAN gateway LEDs
LED
name LED
colour
State Indication
Ready
Red
Always on Power is on and the NPort is booting up.
Blinking
Indicates an IP conflict, or DHCP or BOOTP server is not
responding properly
Green
Always on Power is on and the NPort is functioning normally.
Blinking
The NPort has been located by the NPort Administrator’s
Location function.
- Off Power is off, or a power error.
Link
Orange Always on 10 Mbps Ethernet connection.
Green Always on 100 Mbps Ethernet connection.
- Off Ethernet cable is disconnected
Tx/Rx
Orange Always on Serial port is receiving data.
Green Always on Serial port is transmitting data.
- Off
No data is being transmitted or received through the serial
port.
Please check that your Xcom-LAN/-GSM is up-to-date before reading this section.