Studer Innotec SA
Xcom-GSM/-LAN
16
User manual
6.5
R
EMOVE THE
SD
CARD
Remove the SD card from the computer.
6.6
S
ETUP THE PARAMETERS IN THE
X
COM
-232
I
Insert the SD card into the Xcom-232i.
The setup process will start automatically and
normally takes 1 second.
When the LED stops blinking red, the setup is
finished.
If the setup is successful and you have a RCC, the product's name and its GUID can be
read under "System info" on the RCC.
6.7
X
COM CONNECTS TO THE SERVER
When the parameters are set and applied, the Xcom-GSM or
Xcom-LAN will automatically connect to the server and send
a confirmation message to the RCC.
If there is no message, the Xcom is not connected to the
server.
The Xcom-232i needs to be powered during the setup process. Otherwise, the
configuration will not be taken into account.
If the Xcom is not connected to the server, see chapter 8 for further information.
Figure 8 : Inserting the SD card
