Studer OnAir 1500 Скачать руководство пользователя страница 115

Страница: 115 / 386

OnAir 1500 Digital Mixing Console

Operation 5-59

Document generated: 06.08.14

SW V6.0

Error Code Error Type Error Text / Comment

7000

Warning

CF CARD, Cannot read card. Unidentified Format!

7002

Warning

SYSTEM, Extension ‚UserGUI.ext‘ could not load User Buttons. Reason: ‹Did not find XML-File or XDR-

File: xml\ GUI_UserButtons.xml’.

7004

Warning

SYSTEM, ‘UILogic.xml’ has an incompatible XDR file. Default settings assumed.

The User Warning appears during power-up if, in case of an optional XML, file the XML and XDR file are

incompatible, e.g. the XDR file of a former software release.

Note: The UILogic.xml file is the only optional xml file.

7111

Warning

SYSTEM, Connection to CORE ‘System71’ lost.

The Routing Snapshots of that CORE can no longer be recalled remotely.

Appears if the CORE loses the network connection to another CORE on which Partial Output Routing

snapshots are configured.

7200

Warning

SYSTEM, Number of ‚Logical Inputs‘ has been truncated to ‚255‘

Appears if a number of a certain parameter such as LogicalInputs is configured in the config.xml file that

exceeds the number specified for that parameter (255 in this case).

7201

Warning

SYSTEM, CustomLogics are not supported on this system. Enable CustomLogics by increasing system

memory to 512MByte.

Appears, if an OA2500 starts up with some CustomLogics configured and an installed system memory of

254MByte.

7300

Warning

SYSTEM, The console set-up cannot be changed, since there is at least one channel on-air. Please make

sure no channel is on-air and try again.

Appears when trying to switch to another console set-up, while a LogicalInput is on-master (FInputStatus ->

ChannelOnMaster).

7301

Warning

SYSTEM, The console set-up cannot be changed, since there is at least one remote channel (I/O sharing)

on-air. Please make sure no channel is on-air on a remote system and try again.

Appears when trying to switch to another console set-up while a NetLogicalInput of another system is con-

suming a LogicalInput and is on-master (FInputStatus->ChannelOnMasterNet).

7302

Warning

SYSTEM, Please restart core and desk(s) to complete the set-up change.

Appears when switch to another console set-up.

7303

Warning

SYSTEM, Please restart the ‚Desk‘ to complete the set-up change.

Appears when a container is found that (still) has an different setup as the core.

7400

Warning

SYSTEM, Product.ini is missing.

Appears after power-up if the file Product.ini is missing

7500

Warning

SYSTEM, No Inputs specified in VoiceMix Group Configuration. Configuration ignored.

Using default configuration.

Appears after power-up, if none of the specified VoiceMix Groups has Inputs.

The system uses the default configuration.

7501

Warning

SYSTEM, More than ‘32’ Inputs specified in VoiceMix Group Configuration.

Number of Inputs limited to ‘32’.

Appears after power-up, if the total of inputs of all VoiceMix Groups exceeds 24/32.

The system limits the number of inputs to 24/32 by removing inputs and VoiceMix Groups, if required, from

the configuration.

7502

Warning

SYSTEM, Wrong number of Inputs specified for VoiceMix Group ‘1’. Even number required.

VoiceMix Group ‘1’ has now ‘12’ Inputs.

Appears after power-up, if an odd number of inputs (≠ 1) was specified.

The system corrects the number of inputs to the next lower even number.

7503

Warning

SYSTEM, Only a single Input specified for VoiceMix Group ‘2’. Higher even number required.

VoiceMix Group ‘2’ is ignored.

Appears after power-up, if only a single input was specified.

The system ignores this VoiceMix Group.

7504

Info

SYSTEM, VoiceMix Group Configuration not possible for ‘OnAir1500’. Configuration ignored.

Using default configuration.

Appears after power-up, if a VoiceMix Group Configuration is specified for an OnAir1500/2500 console.

Содержание OnAir 1500



































































































































































































































































































































































































Результаты поиска

Содержание OnAir 1500

Отзывы:

Похожие инструкции для OnAir 1500

Бренды по названию

Популярные бренды

Studer OnAir 1500, Руководство по эксплуатации

Результаты поиска

Содержание OnAir 1500

Отзывы:

Похожие инструкции для OnAir 1500

Бренды по названию

Популярные бренды