Studer D424, Инструкция по эксплуатации и обслуживанию

Страница: 93 / 189

D424 MO Recorder
E4/40 Operation
SW V 1.6 Date printed: 06.03.02
4.10.7 Menu 5, DISK (Disk & Sequence Utilities)
51 SELECT Select Disk Drive
In the standard configuration, the D424 is working with its internal MO
drive. Because the drive runs on a SCSI bus, the system can be expanded
by connecting further devices. The D424 currently supports the 2.6 GB
MO drive and the CD writers.
In multiple drive configurations, a “ current device” is selected. All system
operations are performed with this current device.
All available disk drives will be listed with the type (MO or CD) in the
order of the SCSI address (1...6). The one currently selected is cross-
marked.
Default addresses: 1 for internal drive, and 2 for D741 CD recorder.
For changing the current disk, move to the new drive with the cursor keys,
and confirm the new selection.
52 SCSI SCSI Offline
In SCSI offline mode, a D424 is configured as a single MO drive; all in-
ternal functions are disabled. As a slave, it can be connected to any SCSI-
based controller that supports the 2.6 GB ISO drive, like a master D424 or
a suitable digital audio workstation.
yes Select SCSI offline mode. D424 is operated from an external controller.
no Select standard online operation.
53 FORMAT Format Disk
The inserted disk will be high-level formatted. All data will be lost, the
necessary DOS file structure is stored onto the disk. The process takes a
few seconds.
The FORMAT DISK utility is used for initializing a disk and to make it
ready for recording. After inserting a new, unformatted disk, the D424
automatically switches to this menu.
High-level formatting is also the fastest way to “ clean” a recorded disk
and create a new, empty disk.
cancel return to the previous menu page
yes starts the formatting process. A “ processing” message will be shown dur-
ing the formatting process, which takes only a few seconds.
54 CLEANUP Cleanup Disk
The CLEANUP process removes all sound files that are not used by any of
the sequences. It is performed to remove all temporary sound files that
were created during a session. All sequences and the required audio files
remain unchanged.
cancel Return to the previous menu page
yes Start the CLEANUP process. A “ processing” message will be shown
during the process.
The CLEANUP process can reassign space for recording. If a sequence
has been recorded with a single recording session, a CLEANUP cannot
have any effect – only complete sound files will be deleted.