Studebaker SB3500, Руководство пользователя

Страница: 10 / 15

E-9
SNOOZE FUNCTION
When the alarm sounds, tap the SNOOZE BUTTON (#5) to temporarily turn off the
alarm and activate the snooze function, the alarm will stop and sound again 9 minutes
later. If you tap the SNOOZE BUTTON (#5) again, the alarm will temporarily turn off
again and sound again in 9 minutes and so on.
NOTES:

The corresponding AL1 or AL2 icon light and the SNOOZE icon blink on the LCD
DISPLAY (#10) during the snooze period.

To cancel the snooze period and the alarm, press the POWER /SOURCE
BUTTON (#1).
RADIO OPERATION
Listening to the radio
1. Tap the POWER /SOURCE BUTTON (#1) to turn on the unit.
2. Tap the POWER /SOURCE BUTTON (#1) repeatedly to select FM or AM radio
mode.
3. The FM icon will turn on and the frequency will show on the LCD display (#10).
4.
Tap the SKIP BACKWARD BUTTON (#3) or SKIP FORWARD BUTTON
(#9) to adjust frequency.
5. Press and hold the SKIP BACKWARD BUTTON (#3) or SKIP FORWARD
BUTTON (#9) to search for the previous or next available FM station.
6. If the reception is poor, try Manual Tuning to fine-tune the station. Tap the SKIP
BACKWARD BUTTON (#3) or SKIP FORWARD BUTTON (#9) briefly to
manually tune through the frequency band.
7. Adjust the VOLUME CONTROL (#8) to obtain the desired volume level.
8. When you have finished listening, press and hold the POWER /SOURCE
BUTTON (#1) to turn the radio off.
Notes:

When in radio mode, the display will automatically switch back to showing the time
after a few seconds.

When listening to the radio, you can check the frequency of the station you are
listening by tapping the SKIP BACKWARD BUTTON (#3) or SKIP FORWARD
BUTTON (#9). The unit will automatically change back to the time after a few
seconds.
To set the radio presets
The unit allows you to store up to 10 FM s tations and 10 AM stations for easy recall at
any time.
1. Press the POWER /SOURCE BUTTON (#1) to turn on the unit.
2. Tap POWER /SOURCE BUTTON (#1) repeatedly to select FM or AM radio mode.
3. Tap the SKIP BACKWARD
BUTTON (#3) or SKIP FORWARD BUTTON
(#9) to select the desired station.
4. Press and hold the SET/MEM/M+ BUTTON (#2) until “P01” shows on the LCD
DISPLAY (#10).
5. Tap the SKIP BACKWARD BUTTON (#3) or SKIP FORWARD BUTTON
(#9) to select a preset number (P01-P10).
6. Press the SET/MEM/M+ BUTTON (#2) again to confirm the preset.
7. Repeat steps 2 through 6 to preset up to 10 stations.