background image

- 2 -

Cont ...

PRODUCT DESCRIPTION

Electric motor driven submersible pump with float switch control on selected models.

APPLICATION

The submersible pump range is designed for re-circulation, drainage and transfer of fresh 
water in outdoor or indoor applications.
Model types within the range which have the suffix ‘A’ incorporate an adjustable float 
switch assembly which provides automatic pump control.

Supersub Range:

 This model is suitable for clean water, rain water or waste water 

applications.
Note:  Waste water is water that has been used in the home except water from toilets  

 

 

eg. dish, shower and laundry water.

Supervort Range:

 These models are suitable for dirty water applications and are capable 

of handling semi-solids in suspension of up to 20 mm in diameter.  They are also suitable 
for all applications specified in the Supersub range.

 

z

This pump set must not be used for any other  

 

  application without the written consent of Stuart    
  Turner Limited and in particular, must not be  

 

  connected directly to the mains water supply.

 

z

This appliance can be used by children aged from  

  8 years and above and persons with reduced  

 

  physical, sensory or mental capabilities or lack    
  of experience and knowledge if they have been    
  given supervision or instruction concerning use of  
  the appliance in a safe way and understand the    
  hazards involved.  Children shall not play with the  
  appliance.  Cleaning and user maintenance shall    
  not be made by children without supervision.

 

z

Children should be supervised to ensure that they  

  do not play with the appliance.

Please read installation details carefully as they are intended to ensure this 
product provides long, trouble free service.  Failure to install the unit in 
accordance with the installation instructions will lead to invalidation of the 
warranty.

STORAGE

If this product is not to be installed immediately on receipt, ensure that it is stored in a dry, 
frost and vibration free location in its original packaging.

Содержание supersub 230a

















Отзывы: