- 9 -
3.20
Wiring Diagram:
The supply cord and internal wiring within the terminal box are
routed and secured to ensure compliance with the electrical
standard EN 60335-1. Do not disturb the internal wiring or
factory routing and securing of all internal wiring.
Model
Fuse Size (AMPS)
All Models
5
3.21
Fuse:
3.22
Supply Cord Replacement:
The supply cord and internal wiring within the terminal
box are routed and secured to ensure compliance with the
electrical standard EN 60335-1. It is essential that prior to
any disturbance of this internal wiring, all cable routing and
securing details are carefully noted to ensure re-assembly to
the same factory pattern is always maintained.
If the supply cord is to be changed or is damaged, it must be replaced with a
special cord assembly available from Stuart Turner or one of their approved
repairers.
On disassembly note the cord retention and routing system. Re-assemble to the
same pattern.
For information on cable connection consult the wiring diagram and cable gland
fitting instructions.
3.23
Cable Gland Fitting Instructions:
To enable correct assembly of the cable gland the
‘O’-ring (Fig. 5 item 1) must be placed over the cable
before the clamping insert (Fig. 5 item 2) can be
tightened.
Note: Cable diameter range:- 6.5 mm to 9.5 mm.
Fig. 5
2
1
MAIN WINDING
THERMOTRIP
CAPACITOR
START WINDING
FLOWSWITCH
REED (S2)
LIN
K
WIRE
(BLU
E)
BROWN
BLAC
K
BLU
E
GREEN/YELLOW
BLUE
BROWN
L
M
N
N
S1 S2 S2 S1
L
E
N
FLOWSWITCH
REED (S1)
230 VAC/1PH/50Hz
SUPPLY
Fig. 4
