Stuart Turner mainsboost MBF 60-1-15, Инструкция по установке и обслуживанию

Страница: 11 / 16

- 11 -
Cont ...
6 TECHNICAL SPECIFICATION
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
*Note: The maximum pressure that can be applied to the pump under any
installation conditions.
6.11 Noise: The equivalent continuous A-weighted sound pressure level at a
distance of 1 metre from the pump does not exceed 70 dB(A).
Pump Model
MBF 60-1-15
46631
MBF 80-1-15
46634
General Guarantee 3 years
WRAS approval 1412081
Features Pump type Peripheral
Mechanical seal EPDM / PTFE / Al. Oxide
Flexible hoses 2 2
Diaphragm tank size 60 litre 80 litre
Diaphragm tank water capacity 30 litre 40 litre
Dry run protection
ü ü
Materials Pump body Brass
Impeller Brass
Performance Maximum head (closed valve) 3.2 bar
Maximum flow 16 l/min
Maximum working pressure* 450 kPa (4.5 bar)
Maximum ambient air temperature 40
o
C
Min / Max water temperature Min 4
o
C / Max 35
o
C
Flow switch sensitivity (approx) 0.6 l/min
Connections Pump connections G ¾ male
Flexible hoses Connections G ¾ female x 15 mm push-in x 200 mm long
Motor Type Induction, auto-reset thermal trip
Duty rating Continuous
Electrical Power supply / phase / frequency 230 V a.c. / 1 / 50 Hz
Current (full load) 1.7 Amps
Power consumption 365 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Physical Enclosure protection IPX4
Length 480 mm
Width 457 mm
Height (excluding hoses) 663 mm 852 mm
Dry Weight (including fittings) 17.6 Kg 21.8 Kg
Filled Weight (maximum) 46.6 Kg 60.8 Kg