- 13 -
5 CONFIGURATION
5.11 Mainsboost Charger MJ3 is a very flexible solution, offering a packaged
system to suit any type or size of building no matter how large or small the
demand is. The following illustrations depict just some of the most typical
installations.
5.12
Single occupancy application:
Use of Mainsboost Charger
MJ3 in a house offers water
on demand whilst giving
maximum flexibility. As can
be seen the upstream
line-in kit has to be fitted on
to the rising main but the
vessel/pump can be fitted
wherever there is a space,
for example; utility, kitchen,
upstairs cupboard or loft,
providing adequate
provisions are taken for the
weight, frost protection
etc (see Fig 7).
Where height restrictions
exist the MJ3 HM pump can
be supplied along with a
MB 200SH or MB 250SH
vessel for horizontal
installation.
5.13
Multiple occupancy application:
Often affected by poor water
supplies Mainsboost Charger
MJ3 offers the perfect
solution.
For multiple occupancy
buildings again the
upstream line-in kit is located
next to the rising main and
sized to meet the demand of
the entire building. Each
apartment then has its own
vessel and pump located
within the property, sized to
meet the apartments own
demand (see Fig. 8).
UPSTREAM
IN LINE KIT
Fig. 7
A
UPSTREAM
IN LINE KIT
Fig. 8
