13 Operating Instructions: DTP08(-Ex)
Troubleshooting
When trying to locate a fault, proceed in the order shown in the table.
NOTE:
Troubleshooting must only be performed by a suitably competent individual as decided
by the company the equipment is intended for use with.
If, after carrying out the following remedial actions, the unit cannot be restored to operation,
contact the manuf
acturer’s technical helpline. In order for customer services to react quickly
and specifically to the fault, the following information is essential:
-
Unit serial number
-
Description of error
-
Unit product name
-
Current location / Company
Fault
Reason/Action
Unit does not lift
Unit overloaded, note safe working load of unit
Unit does not lift to full stroke
Pump is short of oil. Ensure rod is at bottom of stroke
and top-up/refill with hydraulic oil. Shell Tellus 22 or
equivalent, half sight glass
Oil leaking from top of hydraulic
cylinder, around chromed rod
Replace hydraulic cylinder seals
Oil leaking from tank filler point
Filler bung damaged or unit over filled with oil
Drum lowering unintentionally
Ensure lowering lever is in the closed position
