S
Se
errvviicce
e
A
Arrm
m cca
ap
p rre
ep
plla
acce
em
me
en
ntt
T
To
oo
ollss rre
eq
qu
uiirre
ed
d::
•
Rubber hammer
•
Large flat screwdriver
P
Prro
occe
ed
du
urre
e::
1. Using a rubber hammer, hit the back of the arm cap (A) toward the front of the glider until it stops moving forward (Figure
N
No
otte
e -- Use caution when you hit the arm cap to avoid the risk of damage to the fabric.
2. Position a large flat screwdriver between the arm cap and arm to pull up on the arm cap and loosen the arm cap from
the glider. Remove and discard the arm cap.
3. Align the new arm cap bolts with the holes at the front of the arm slots.
4. Using a rubber hammer, hit the arm cap down until it is tight to the arm.
5. Using a rubber hammer, hit the arm cap toward the back of the glider until it stops moving back.
N
No
otte
e -- Use caution when you hit the arm cap to avoid the risk of damage to the fabric.
6. Verify proper operation before you return the product to service.
A
F
Fiig
gu
urre
e 2
2 –– A
Arrm
m cca
ap
p
S
Se
ea
att ccu
ussh
hiio
on
n rre
ep
plla
acce
em
me
en
ntt
T
To
oo
ollss rre
eq
qu
uiirre
ed
d::
•
#3 Phillips screwdriver
•
Blanket or equivalent
P
Prro
occe
ed
du
urre
e::
1. Lay a blanket, or equivalent, on the floor behind the glider.
2. Using two hands, lift up on the bottom of the glider to flip the glider onto its back.
C
CA
AU
UT
TIIO
ON
N -- Always use two people when you lift or move the product. Always confirm stable foot placement and back
support to avoid the risk of injury or product damage.
3507009001-A
9
EN