Stryker Rugged EZ-PRO R4 6092 Скачать руководство пользователя страница 8

Страница: 8 / 116

Warranty

Stryker EMS Return Policy

Cots, Stair Chairs, Evacuation Chairs, Cot Fasteners and Aftermarket Accessories:

may be returned up to 180 days of receipt if they meet the following guidelines:

Prior to 30 Days

30 day money back guarantee in effect

Stryker EMS is responsible for all charges

Returns will not be approved on modified items

Prior to 90 Days

Product must be

unused

undamaged

and in the original packaging

Customer is responsible for a 10% restocking fee

Prior to 180 Days

Product must be

unused

undamaged

and in the original packaging

Customer is responsible for a 25% restocking fee

Return Authorization:

Merchandise cannot be returned without approval from the Stryker Customer Service

Department. An authorization number will be provided which must be printed on the

returned merchandise. Stryker reserves the right to charge shipping and restocking

fees on returned items.

SPECIAL, MODIFIED, OR DISCONTINUED ITEMS NOT SUBJECT TO RETURN.

Damaged Merchandise:

ICC Regulations require that claims for damaged merchandise must be made with the

carrier within fifteen (15) days of receipt of merchandise. DO NOT ACCEPT DAM-

AGED SHIPMENTS UNLESS SUCH DAMAGE IS NOTED ON THE DELIVERY RE-

CEIPT AT THE TIME OF RECEIPT. Upon prompt notification, Stryker will file a freight

claim with the appropriate carrier for damages incurred. Claim will be limited in amount

to the actual replacement cost. In the event that this information is not received by

Stryker within the fifteen (15) day period following the delivery of the merchandise, or

the damage was not noted on the delivery receipt at the time of receipt, the customer

will be responsible for payment of the original invoice in full.

Claims for any short shipment must be made within thirty (30) days of invoice.

International Warranty Clause:

This warranty reflects U.S. domestic policy. Warranty outside the U.S. may vary by

country. Please contact your local Stryker Medical representative for additional infor-

mation.

Patent Information

Rugged

Products are covered by one or more of the following patents:

United States 5,575,026

6,276,010

6,648,343

6,908,133

6,796,757

5,537,700

6,125,485

6,735,794

7,100,224

D527,103

Other Patents Pending

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ

Содержание Rugged EZ-PRO R4 6092





















































































































Результаты поиска

Содержание Rugged EZ-PRO R4 6092

Отзывы:

Бренды по названию

Популярные бренды

Stryker Rugged EZ-PRO R4 6092, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Rugged EZ-PRO R4 6092

Отзывы:

Бренды по названию

Популярные бренды