Stryker Rugged EZ-PRO R4 6092 Скачать руководство пользователя страница 18

Страница: 18 / 116

Cot Operation

Using Restraint Straps

WARNING

Always use all restraint straps to secure the patient

on the cot. An unrestrained or partially restrained

patient may fall from the cot and be injured.

Always secure the patient on the cot with all the re-

straint straps. Buckle the restraints across the pa-

tient’s chest/shoulders, waist and legs (Figure 8).

WARNING

Never leave a patient unattended on the cot or injury

could result. Hold the cot securely while a patient

is on the cot.

When attaching the restraint straps to the cot, keep

in mind the attachment points should provide strong

anchorage and proper restraint position while not in-

terfering with equipment and accessories. Wrap

the strap around the cot frame and back through the

loop on the end of the strap as shown in Figures 9

and 10. The arrows indicate alternate attachment

areas.
Keep the restraint straps buckled when the cot is not

being used with a patient to avoid damage to the

buckles and straps.
For Pedi

−

Mate

restraint instructions see page 18

and 19.

Figure 8

−

Patient Restrained on EZ

−

PRO

Figure 9

−

Head Section Restraints

Figure 10

−

Foot Section Restraints

Содержание Rugged EZ-PRO R4 6092





















































































































Результаты поиска

Содержание Rugged EZ-PRO R4 6092

Отзывы:

Stryker Rugged EZ-PRO R4 6092, Руководство по эксплуатации и техническому обслуживанию, Страница: 18 / 116

Результаты поиска

Содержание Rugged EZ-PRO R4 6092

Отзывы: