manualshive.com logo in svg

Stryker Rugged EZ-PRO R4 6092, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Stryker Rugged EZ-PRO R4 6092 Скачать руководство пользователя страница 43

Service Information

41

FOOT END RELEASE HANDLE ADJUSTMENT

E

Contact Point 1

A

C

G

Contact Point 2

B

D

F

H

Figure 48 

−

 Foot End Release Components

1. Remove the bolt (G) and disconnect the link (B).

2.

Lift the cot at both ends to take the weight off the base frame.

  Pull the foot end release handle and

verify the patient left latch bar (C) is touching the foot end lever support bracket (E) at contact point 1 as

shown above.

3. If the handle requires adjustment, remove the bolt (F), turn the rod end (H), and replace the bolt (F) until

the conditions described in step 1 are achieved.  Verify there is approximately 1/8” of clearance between

the release handle and the grip on the lift bar (as shown above).

4. Replace bolt (G) to reconnect link (B).

5.

Lift the cot at both ends to take the weight off the base frame.

  Pull the foot end release handle

and verify the patient right latch bar (D) is touching the foot end lever support bracket (E) , at contact point

2.  Verify the patient left latch bar (C) is touching the foot end lever support bracket (E) at contact point

1.  Verify there is approximately 1/8” of clearance between the release handle and the grip on the lift bar

(as shown above).

6. If the handle requires adjustment, remove the bolt (G),turn the rod end (H), and replace the bolt (G) until

the conditions described in step 5 are achieved.

Содержание Rugged EZ-PRO R4 6092





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды