Stryker Prime 1105, Руководство по эксплуатации

Страница: 23 / 74

N No otte e -- Always make sure that the brake is released before you move the product to avoid operator or patient injury.
T Trra an nssp po orrttiin ng g a a p pa attiie en ntt w wiitth ho ou utt B Biig g W Wh he ee ell
W WA AR RN NIIN NG G
• Always position the patient in the center of the product.
• Always lock the siderails in the full up position with the sleep surface horizontal and in the lowest position when you
transport a patient.
To transport a patient without B Biig g W Wh he ee ell:
1. Put the brake/steer pedal (A) in the neutral position (Figure 8).
A
B
C C
F Fiig gu urre e 8 8 –– T Trra an nssp po orrttiin ng g w wiitth ho ou utt B Biig g W Wh he ee ell
2. Lower the litter to the lowest position.
3. For Model 1125 only, make sure that the On/Drive-Off/Manual switch is in the Off position.
4. Unplug the power cord from the hospital grade wall outlet if your product is equipped with the electric lift option or
electric litter option.
5. Use the push handles to push the product.
6. Apply the brakes to lock the product in place.
N No otte e
• Always make sure that the brake is released before you move the product to avoid operator or patient injury.
• With the product in the neutral position, B Biig g W Wh he ee ell (B) is elevated and the product rests on all four casters (C) (Figure
8). In this position, you can move the product in any direction, including sideways.
T Trra an nssp po orrttiin ng g a a p pa attiie en ntt w wiitth h B Biig g W Wh he ee ell
W WA AR RN NIIN NG G
• Always position the patient in the center of the product.
• Always lock the siderails in the full up position with the sleep surface horizontal and in the lowest position when you
transport a patient.
C CA AU UT TIIO ON N -- Do not apply the steer pedal when B Biig g W Wh he ee ell is resting on a threshold or other raised area. The force required
to apply B Biig g W Wh he ee ell will be higher than normal which may cause product damage.
To transport a patient with B Biig g W Wh he ee ell:
1. Raise the siderails to the highest position. Pull on each siderail to make sure it is latched.
2. Lower the litter to the lowest position.
1115-309-001 Rev C.2 19 EN