Stryker MV3 5900 Скачать руководство пользователя страница 38

Страница: 38 / 138

•

Needle nose pliers

•

Syn-Tech grease (3000-200-719)

Prro

occe

urre

e::

1. Raise the product to the highest height position.

2. On the footboard control panel, press E

ntte

err to access the S

ettttiin

gss menu.

3. Highlight S

uttd

n and press E

ntte

err.

4. Unplug the power cord from the wall outlet.

5. Push down on the brake pedal to apply the brake.

6. Expand all litter decks to the 48 in. position.

7. Raise the siderail to the up and locked position.

8. Using a T15 Torx driver, remove the two screws that secure the junction board assembly to the siderail carrier. Remove

the junction board assembly.

9. Unplug the two siderail cables from the junction board assembly.

10. Using a T27 Torx driver, remove the screw that secures the guide rod to the litter.

11. Push the siderail release button to lower the siderail to the lowest stowed position.

12. Using needle nose pliers, from under the litter surface, slide each glide rod out.

otte

e -- Save the two rubber washers on each glide rod, one on both sides of the siderail carrier, to reinstall. Use Syn-

Tech grease to lube the glide rod, if required.

13. While supporting the rail with one hand, remove both glide rods and remove the siderail assembly.

14. Reverse steps to reinstall.

15. Verify proper operation of the product before you return it to service.

IIV

V p

olle

e a

atttta

acch

ntt

ollss rre

uiirre

d::

•

3/8” ratchet

•

3/16” hex driver

•

1/2” socket

•

9/16” socket

Prro

occe

urre

e::

1. Using a 3/16” hex driver, remove and save the power cord retainer shoulder bolt and strap on both sides of the product.

2. Using a 1/2” socket, secure the bracket with the IV pole assembly to the left side of the product with the two supplied

bolts and washers.

3. Using a 1/2” socket, secure the bracket with the rest block to the right side of the product with the two supplied bolts and

washers.

4. Using a 3/16” hex driver, secure the power cord retainer shoulder bolt and strap on both sides of the product through

both brackets.

5. Verify proper operation of the product before you return it to service.

attiie

ntt h

ellp

err a

atttta

acch

ntt

ollss rre

uiirre

d::

•

3/8” ratchet

5900-009-002 Rev A.0

Содержание MV3 5900











































































































































Результаты поиска

Содержание MV3 5900

Отзывы:

Похожие инструкции для MV3 5900

Бренды по названию

Популярные бренды

Stryker MV3 5900, Руководство по обслуживанию

Результаты поиска

Содержание MV3 5900

Отзывы:

Похожие инструкции для MV3 5900

Бренды по названию

Популярные бренды