Stryker FL28C, Руководство по обслуживанию

Страница: 165 / 338

www.stryker.com 280C-009-002 REV B 1-163
Return To Table of Contents
English
Recommended separation distances between portable and mobile RF
communications equipment and the GoBed
®
II MedSurg Bed, Model FL28C.
The GoBed
®
II MedSurg Bed, Model FL28C is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled . The customer or the user of the GoBed
®
II MedSurg Bed, Model
FL28C can help prevent electromagnetic interferences by maintaining a minimum distance between portable
and mobile RF communications equipment (transmitters) and the GoBed
®
II MedSurg Bed, Model FL28C as
recommended below, according to the maximum output power of the communications equipment .
Rated maximum output
power of transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d=1 .2
80 MHz to 800 MHz
d=1 .2
800 MHz to 2 .5 GHz
d=2 .3
0 .01 1 .12 0 .12 0 .23
0 .1 0 .38 0 .38 0 .73
1 1 .2 1 .2 2 .3
10 3 .8 3 .8 7 .3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer .
Note 1
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies .
Note 2
These guidelines may not apply in all situations . Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people .
GOBED
®
II MEDSURG BED, MODEL FL28C (CONTINUED)
EMC Information